|
With economic and social development, the total amount of domestic and industrial solid waste discharged is considerable. In 2020, Vietnam generated about 2.2 million tons of plastic waste and 2 million tons of industrial solid waste. And most of them are landfilled and take a long time to decompose. This has dramatically affected the environment, costly land resources, and considerable transportation, burial, and management costs of those landfills. Therefore, many scientists have studied to recycle these wastes. There are two approaches to using recycled waste in hot mix asphalt (HMA). Waste plastic changes the properties of the asphalt binder, and solid waste replaces coarse particles in an asphalt mixture. During the research on using recycled waste for asphalt concrete, PET (Poly Ethylene Terephthalate) and RFCC (Residue Fluid Catalytic Cracking) were chosen for the study. This paper presents a study on the influence of PET (with 0.2% content in HMA) and RFCC (with 5% content in HMA) on the viscoelastic property of asphalt concrete based on dynamic modulus, phase angle, and complex viscosity values. At high temperatures, HMA using PET and RFCC exhibit complete elastic behavior (φ ≈ 50) in contrast to the viscous elastic behavior of the control sample (φ ≈ 150). Compared control sample, RFCC significantly increased the stiffness of HMA at low and high temperatures; with the dynamic modulus of HMA using RFCC increased 1.1 times at low and 1.6 times at high temperatures; the viscosity of HMA using RFCC and PET decreased 10 times and 7 times at low temperatures.
|
