The impingement cooling is used to protect turbine components under high thermal load. This paper conducts a numerical study of heat transfer characteristics of turbine leading edge with lamilloy cooling structure. Target surface curvature and jet-to-surface spacing under various crossflow Reynolds number conditions are considered. Meanwhile, the target surface is dimpled to enhance heat transfer capability. Besides, staggered film holes are considered in the computational domain. The results show that the crossflow induces a counter rotating vortex pair that greatly increase the near wall turbulence and local heat transfer. The vortex pair forms the bound for a U-shaped high heat transfer region caused by the jet impingement. The target surface curvature tends to enlarge the relative area of the U-shaped region. The increased crossflow strength weakens the jet cooling effect, the total heat transfer performance is therefore decreased. Large jet-to-surface spacing enhances the impingement cooling when crossflow is weak but the total heat transfer will not recover as crossflow Reynolds number get higher compared with small and medium spacing cases.
|